About BRepMesh_IncrementalMesh

Quaoar

Administrator
Staff member
@Alexmercer please, provide test data if you want a constructive feedback. It's likely that your faces do not share a common edge topologically.
 

Quaoar

Administrator
Staff member
After IGES import, your part's faces remain unstitched, hence the gaps. See red edges (naked edges) below:

1663848849906.png

Gaps:

1663848957267.png

Once an IGES file is loaded, you're supposed to sew faces together with BRepBuilderAPI_Sewing. Then it's fine.

1663849041691.png
 
Top