Quaoar's latest activity

Yep, it's exactly this "origami" with sole deformations centered at bends and fully driven by K-factor. If that's the case, there is an...

Hey, what, have you given up with cadseer? Or have you rather finalized it more or less? Your experience with profilers sounds way more...

You can definitely talk about sheet metal here, on this forum. We've been working on such kind of an algorithm starting from 2017, and...

Hey @nicoloc and welcome to the forum. Yep, this story got old already and NetGen sucked quite a bit of my blood and nerves back in the...

@pdusp2 It looks like you did the trick. Is your unfolding also written in C++? I have attached a couple of models that you may want to...

@blobfish Interesting approach, indeed. I sometimes do the same with VTune Amplifier on windows, they have a nice "flame chart".

This is done in a pretty stupid way of iterating the UV rectangle of the surface with a prescribed step. Evaluating the surface `s(u,v)`...

Hello @César and welcome to the forum. I don't have PyOCC environment configured on my current laptop, so I can comment using C++ and...

Hi @justinsavage35 and welcome to the forum. The mesh fineness can be tuned with Ctrl+T key combination, which brings you to the dialog...

The SDK hasn't got any well shaped documentation as of now but you may want to ask your questions right here. That's one of the reasons...

Got it. Thank you very much for your help！

You may want to check the documentation of TopoDS_Builder, where in the header file it states that: //! The Add method check for the...

That's the embedded example in Draw Test Harness. You can run it like this: The trick is then to match up all these Tcl commands to...

Hello @lbw Do you want this result? Initial shape is attached as `initialShape.brep`. The edge to add is attached as `edge.brep`...

You can probably build local prisms starting from the side faces of your cuboid inwards the enclosed volume and fuse them together to...